Description

Products You May Like

• BOWL TURNING - DVD

  $19.95 $11.97 0 review(s)

  
  

  Del Stubbs shows you how to turn beautiful bowls and plates. You can start with dry lumber or with green wood you cut yourself. The camera zooms in close to see the careful contact of edge on wood and then moves back so you can study various tool positions, grips and stances. You will learn about: cutting tool types and modification of standard tools grinding and honing chisels gripping various turning tools mounting bowl blanks and roughing out the shape modifying a standard lathe controlling warp in the thin wall of a bowl cutting into endgrain designing bowl forms DVD, also available as a video, see item 22-3.

• SANDING AND FINISHING HARDWOOD FLOORS - DVD

  $19.95 $11.97 0 review(s)

  
  

  Learn to prepare the work area, choose and install sanding belts, work along edges and corners, repair defects and damage, fill the floor, and get a perfect final coat. DVD NTSC

• 3 TECHNIQUES ON 1 DVD, Vol. 1

  $22.95 $13.77 0 review(s)

  
  

  This DVD contains instructions on the following woodworking techniques: Ogee Bracket Feet: This method begins with the layout of the pattern and cove cutting at the table saw. We show you how to set up the mitering of the feet so that each foot matches in design & size. Cabriole Leg: In this technique we walk you through the method to build these graceful legs. Step by step, you learn the correct way to lay out the pattern, the proper cutting sequence at the band saw and how to hand shape the overall design as well as turn the cup of the foot at the lathe. There is also a Bonus included – we show you the process to create these legs using only hand tools!! Along the way we point out a number of simple methods and ideas to insure success. Raised Panel Door: We will begin with an understanding of the parts of a door and how one obtains the sizes for those parts. We show you how to set up and complete the mortise and tenon joint as well as a specific method of creating the raised panel at the table saw.

• BASIC DOOR CONSTRUCTION:CABINETS Vidwood 104 - DVD

  $19.95 $11.97 0 review(s)

  
  

  Demonstrates the differences between flush, lip, and overlay door. Tolerances, allowances, and dimensions for each type of door are presented. This DVD will show you how to begin with an opening and progress through the steps required to build a door. Demonstrates how to rout doors for 3/8 lip styling and how to make small glass molding safely. Also covers plywood doors with decorative molding trim and raised panel doors without complex joinery.

• HANDPLANES IN THE WORKSHOP - DVD

  $19.95 $11.97 0 review(s)

  
  

  Learn how four basic planes can change the way you do woodworking. If you are like many woodworkers, you own handplanes but never learned how to use them to their best advantage. In this video, teacher and plane expert Mario Rodriguez shows the basics of using planes and how four basic planes -- the jointer, the smooth plane, the shoulder plane, and the block plane -- can change the way you do woodworking. Learn how to: - tune and sharpen a plane - correct stance and planing technique - joint an edge - adjust drawers for a perfect fit - trim tenons and other joints - surface stock with planes

• HAND-CUT DOVETAILS - DVD

  $29.95 $17.97 0 review(s)

  
  

  Subtitle: “Bench-side instruction on cutting through dovetails.“ A beginner's guide to the through dovetail, this video clearly demonstrates reliable, easy-to-follow techniques for making accurate hand-cut dovetails. Note: this item complements Rob's Hand-Cut Dovetails shop book, item 14-510.