Description

Products You May Like

• BUILD A CLASSICAL GUITAR WITH ROBERT O'BRIEN - DVD

  $39.95 $23.97 0 review(s)

  
  

  This DVD is a must for first time builders and a great source of reference for those already building classical guitars. The DVD has more than 1400 photos and over 3 1/2 hours of step by step audio instruction that will demystify the art of classical guitar building. It will save you time and money and pay for itself many times over as you embark on the rewarding journey of building your own classical guitar.

• HANDPLANES IN THE WORKSHOP - DVD

  $19.95 $11.97 0 review(s)

  
  

  Learn how four basic planes can change the way you do woodworking. If you are like many woodworkers, you own handplanes but never learned how to use them to their best advantage. In this video, teacher and plane expert Mario Rodriguez shows the basics of using planes and how four basic planes -- the jointer, the smooth plane, the shoulder plane, and the block plane -- can change the way you do woodworking. Learn how to: - tune and sharpen a plane - correct stance and planing technique - joint an edge - adjust drawers for a perfect fit - trim tenons and other joints - surface stock with planes

• INSTALLING KITCHEN CABINETS AND COUNTERTOPS - DVD

  $19.95 $11.97 0 review(s)

  
  

  “Transform your kitchen with the help of a master.” If you're replacing your tired kitchen cabinets or are planning to install a new kitchen, this video workshop is a must. With the camera beside him the whole way, master carpenter Tom Law transforms a bare farmhouse addition into a modern country kitchen, complete with floor-to-ceiling pantries and a large island counter. Learn to: - hang upper cabinets - fit cabinets to uneven walls and floors - position a lazy Susan corner cabinet - clamp and screw cabinets tightly together - create an attractive L-shaped island - set and seam a Corian countertop

• HANDPLANE BASICS: A BETTER WAY TO USE BENCH PLANES- DVD

  $24.95 $14.97 0 review(s)

  
  

  While bench planes are the most fundamental handplanes in your shop, they also are the most vexing. Ask two woodworkers how to choose, set up and use your bench planes and you'll get three answers. After years of historical research and practical bench experience, Editor Christopher Schwarz has found a way to simplify the convoluted bench plane system so you can think for yourself when it comes to these tools. After viewing this DVD you'll know how to select the right size plane for your work. You'll know how to sharpen and set it up so it does the job at hand. And you'll learn how to use the plane so you make perfectly flat and gleaming panels (with the minimum amount of effort). This DVD doesn't simply spout off a new idiosyncratic way to work with bench planes. Instead Schwarz explains how all the systems work so you can immediately see their strengths and weaknesses and exploit them so you'll do better work. "Handplane Basics" puts into practice all of the principles explained in the story "Bench Planes: The System of Three" in this issue of Woodworking Magazine and dives further into the topics of sharpening, setup and use. If you are confused or frustrated by your bench planes, this DVD is just the ticket.

• ROUTER MADE DOVETAILS VW-0203 - DVD

  $24.95 $14.97 0 review(s)

  
  

  If you have ever wondered if there is an easy way to learn how to make half-blind dovetails using one of the many dovetailing jigs on the market, this video is for you. Learn about various jigs available, types of bits and accessories. You will see many different jigs set up and used and you will see incorrectly cut dovetails and learn the techniques for correcting them. Dr.Cliffe gives you the rules and guidelines for successful routing of half-blind dovetails.

• TURNING PROJECTS - DVD

  $19.95 $11.97 0 review(s)

  
  

  There's no end to the splendid variety of useful objects you can turn once you see Richard Raffan at his lathe. In this DVD, you'll learn to select the wood species best suited for a wide variety of turning projects. Raffan shows you how to manipulate skews, gouges and parting tools to produce the whole repertoire of wood-turning cuts, and how to recognize the structural aspects of a project as it develops on the lathe. Raffan also shows you how to sand and apply finishes and waxes, and he offers important safety tips throughout the DVD. Among the projects Raffan shows you how to turn are hollow vessels, bottle coasters, spatulas, mallets, small bowls, and beads. DVD also available as a video, see item 22-53. The book is item 16-101.