Home Back My Cart : 0 item(s)

 

Woodworking DVDs

Home > Additional Formats > Woodworking DVDs

117 item(s) - Page 2 of 4

• FWW: VIDEO WORKSHOP SERIES #3 BOOKCASE WITH BRACKET FEET

  $29.95 $17.97 0 review(s)

  
  

  In this video workshop I?m going to show you how to build a basic bookcase and finish it with interesting, attractive details. You make the case from hardwood-veneer plywood, assembling it with screws and simple dado-and-rabbet joints. At the base, you have a choice: You can make a flat-bracket base that you cut on the tablesaw and bandsaw, or if you want the same kind of base used on period furniture, you can make an ogee bracket foot. To make this base, you cut a cove in thick stock on the tablesaw; I?ll show you how to do that. Then you shape the rest of the curved foot with planes and scrapers. Finally, you cut a decorative scroll pattern on the bandsaw. I?ll show you how that?s done; the downloadable plan includes full-size patterns for both feet. This video workshop refines bookcase designs from an article I wrote for Fine Woodworking #133; the photos above are from that article. winning woodworker and teacher Philip C. Lowe in this video workshop, building a bookcase with adjustable shelves. You'll get two options for the base. The basic case has a flat-bracket base, with simple curves cut on the bandsaw. Or, you can substitute an ogee bracket foot. Highlights include: More than 1 hour of video instruction. Useful techniques that simplify how you edge the plywood, handle large sheets of plywood, and shape moldings. Download the woodworking plan and talk to the author in the Ask the Experts forum.

• FWW: VIDEO WORKSHOP SERIES #4 SMALL TOOL CABINET

  $29.95 $17.97 0 review(s)

  
  

  In this video workshop, Hack goes step-by-step through the construction of a small hanging wall cabinet. Hack has taught a course in how to build this case to woodworkers from all over. It's a versatile design and the perfect hand tool project designed to hone your skills. Hack demonstrates a better way to build wall cabinets using sliding dovetails and an unorthodox face frame that make cabinets stronger, better looking, and easier to build. He also shares tips on making your own decorative moldings and bandings and will shows how to install them, sharing a practical lesson on getting perfect mitered corners. In addition, he gives tutorials on making and fitting a door and drawer. Learn how to build a hanging cabinet perfect for your favorite hand tools or collectibles. This video series covers: Smart sliding dovetail construction Shopmade molding and banding Building a traditional door and drawer Buy the digital plan from our store

• FWW: VIDEO WORKSHOP SERIES #7 GARDEN BENCH

  $19.95 $11.97 0 review(s)

  
  

  Design outdoor furniture to weather well. How to Build a Garden Bench opens with furniture maker Hank Gilpin offering seasoned advice on designing pieces to withstand the elements and age gracefully. Then, woodworker Matt Kenney guides you step by step through the process of constructing this gorgeous garden bench on this DVD, that includes a Bonus SketchUp Plan. Advance your joinery skills. Working on this project, you’ll learn how to make tight-fitting mortise-and-tenon joints that are key to sturdy outdoor furniture – a technique you can put to good use on future projects. Plus, you get an experienced woodworker’s take on the subtle art of shaping the curved elements that define this piece. Expert tips to work smarter and faster. Save time as you discover simple methods for turning out lightening-fast mortises, two great ways to tenon, and tips for no-fuss, no-muss gluing up. As you build this artfully designed bench, you’ll also increase your know-how and advance your skills. Order your How to Build a Garden Bench DVD now. About the authors Matt Kenney – Watertown, Connecticut A teacher of philosophy before he started working as an editor at Fine Woodworking, Matt Kenney started building furniture as a hobby. His first big project was a crib for his daughter constructed on a 2 ft. by 10 ft. apartment balcony. Then Matt met Joe Mazurek, a professional furniture maker in Camden, SC., who, according to Matt, “taught me almost everything I know about the craft.” Hank Gilpin – a Connecticut native Hank Gilpin has been designing and building fine art furniture for 30 years. A graduate of Boston University with a degree in photojournalism, he served in Vietnam as an army photographer. He was introduced to woodworking by Tage Frid at the Rhode Island School of Design. Hank is best known for the traditional, sturdy benches he builds in his home shop – a converted church.

• HAND PLANING AND SHARPENING - DVD

  $29.95 $17.97 0 review(s)

  
  

  Subtitle: “Bench-side instruction on sharpening and using hand planes.“ A clear presentation of hand planing basics focusing on four tools -- the No. 4 1/2 Smooth Plane, the No. 60 1/2 Low Angle Adjustable Mouth Block Plane, the No. 8 Jointer and the No. 60 1/2R Rabbet Block Plane. Includes a demonstration of reliable sharpening techniques.

• HAND-CUT DOVETAILS - DVD

  $29.95 $17.97 0 review(s)

  
  

  Subtitle: “Bench-side instruction on cutting through dovetails.“ A beginner's guide to the through dovetail, this video clearly demonstrates reliable, easy-to-follow techniques for making accurate hand-cut dovetails. Note: this item complements Rob's Hand-Cut Dovetails shop book, item 14-510.

• HAND-CUT MORTISE AND TENON - DVD

  $39.95 $23.97 0 review(s)

  
  

  Subtitle: “Bench-side instruction on hand cutting the mortise and tenon and the through wedged tenon joints. Rob tackles the traditional mortise and tenon joint, covering the basics from the necessary tools to stock prepartation and layout, to proper techniques for sawing, chopping and fitting this useful joint. He finishes up with a demonstration of the decorative through wedge tenon, to add an elegant detail to any finished piece.

• HANDPLANE BASICS: A BETTER WAY TO USE BENCH PLANES- DVD

  $24.95 $14.97 0 review(s)

  
  

  While bench planes are the most fundamental handplanes in your shop, they also are the most vexing. Ask two woodworkers how to choose, set up and use your bench planes and you'll get three answers. After years of historical research and practical bench experience, Editor Christopher Schwarz has found a way to simplify the convoluted bench plane system so you can think for yourself when it comes to these tools. After viewing this DVD you'll know how to select the right size plane for your work. You'll know how to sharpen and set it up so it does the job at hand. And you'll learn how to use the plane so you make perfectly flat and gleaming panels (with the minimum amount of effort). This DVD doesn't simply spout off a new idiosyncratic way to work with bench planes. Instead Schwarz explains how all the systems work so you can immediately see their strengths and weaknesses and exploit them so you'll do better work. "Handplane Basics" puts into practice all of the principles explained in the story "Bench Planes: The System of Three" in this issue of Woodworking Magazine and dives further into the topics of sharpening, setup and use. If you are confused or frustrated by your bench planes, this DVD is just the ticket.

• HANDSCRAPER: UNDERSTANDING, PREPARING AND USING THE ULTIMATE FINISHING TOOL - DV

  $20.00 $12.00 0 review(s)

  
  

  Christopher Schwarz brings the lowly Handscraper to life. He clearly shows effective sharpening methods that will help you master the ultimate finishing tool. The DVD discusses: - why you need a scraper - sharpening scrapers - burnishing - the mechanics of scraping - stoning the edge and face - other notes on use

• MAKING SHAKER OVAL BOXES - DVD

  $37.95 $22.77 0 review(s)

  
  

  Bench side instruction on making Shaker oval boxes, trays and carriers. At the start Rob joins Brent at his shop in Bloomfield, NB for a peak at how they mass-produce the boxes then its back to Robs shop for an in-depth step-by-step lesson on making the traditional Shaker oval box. The video moves smoothly from step to step teaching you time saving tips along the way. With a beautiful box the end result, this DVD is sure to motivate you to get into the shop. Rob and Brent demonstrate the power tool and hand tool ways of completing each task. Enjoy this exciting project DVD!

• MARQUETRY DVD & COMPANION BOOK

  $48.95 0 review(s)

  
  

  This comprehensive video demonstrates the process of creating marquetry. It is a continuation of Paul’s first video, Decorative Veneering. This is a project-oriented study with instructions for creating a circular 16 piece radial match and a floral marquetry panel, start to finish. Includes an instruction booklet.

• MEASURING FURNITURE FOR REPRODUCTION - DVD

  $19.95 $11.97 0 review(s)

  
  

  Learn the simple steps to masterfully reproduce any piece with Measuring Furniture for Reproduction. In this one-of-a-kind DVD, woodworker Phil Lowe shows you how to take the measurements of an existing piece, create a set of plans, and then reproduce the piece in your workshop. You'll also learn how to: Make freehand sketches Use story sticks to record dimensions Scribe profiles of curved parts Measure and analyze hidden joinery Make templates from your drawings Use templates to rough out parts The next best thing to a private lesson. Measuring Furniture for Reproduction takes you right into expert woodworker Phil Lowe's shop for an unforgettable 55-minute lesson. You'll see firsthand exactly how to do the work -- the tools, the techniques, and the subtle rhythms of each process. Impossible to miss a single step! Go directly to the chapter you want to watch and replay it as often as you want. Master it before you move on! Meet your teacher -- woodworking expert Phil Lowe. Phil specializes in reproduction period furniture and the conservation of antiques. His school, The Furniture Institute of Massachusetts, is training a new generation of period furniture makers.

• PATTERN APPROACH TO MARQUETRY - DVD

  $25.00 $21.95 0 review(s)

  
  

  This 1 hour DVD shows many examples of how to approach different patterns when doing marquetry. There is the Sacrificial Method, Background/Foreground Method, the Component Method and the Inlay Method. It also covers what tools will be needed and how to use them. Learn the craft knife Window Method and Overlay Method as well as how to glue the project to a substrate using clamps and using a vacuum press.

• Pyrography Workshop with Sue Walters - DVD

  $24.95 $14.97 0 review(s)

  
  

  Discover the simple techniques of pyrography as you stand alongside one of today's finest woodburning artists, Sue Walters. Ideal for the beginner, or for any woodburners looking to improve their skills, Pyrography Workshop with Sue Walters is like having a private tutoring session. In addition to learning all of the basics of woodburning, you also will receive 10 detailed lessons that culminate in the completion of a stunning hawk project. Inside this 2-DVD set, you will find a 16 page color booklet that includes two patterns for the hawk project, a photo of the finished piece, and an invaluable set of reference photos illustrating more than 60 textures created with just four pyrography tips. Pyrography Workshop with Sue Walters has everything you need to start woodburning like a pro!

• ROB COSMAN’S HAND TOOLS DVD SET (28-84)

  $100.00 $60.00 0 review(s)

  
  

  Get Rob Cosman's first four hand tool DVDs in one convenient set: Hand Planing and Sharpening (28-80), Rough to Ready (28-81), Hand-cut Dovetails (28-82) and Advanced Hand-cut Dovetails (28-83).

• ROGER CLIFFE DVD PACKAGE - DVD

  $264.40 $158.64 0 review(s)

  
  

  Buy the complete Roger Cliffe set of 12 DVDs and save $10.00 off the already-discounted price when ordered separately. Comprises items: ¨ 28-85 Building The Cabinet #101 – DVD ¨ 28-86 Basic Drawer Construction: Cabinets VW-0102 – DVDc ¨ 28-87 Advanced Drawer Construction: Cabinets – DVD ¨ 28-88 Basic Door Construction: Cabinets VW 104 – DVD ¨ 28-89 Advanced Door Construction: Cabinets VW105 – DVD ¨ 28-113 Cope And Stock Raised Panel Doors VW-0205 – DVD ¨ 28-114 Crown And Arch Raised Panel Doors VW-0206 – DVD ¨ 28-115 Finishing And Polishing The Cabinet VW-0309 – DVD ¨ 28-116 Router Door Basics VW-0204 – DVD ¨ 28-117 Router Drawer Basics VW-0202 – DVD ¨ 28-118 Router Made Dovetails VW-0203 – DVD ¨ 28-119 Sanding & Staining The Cabinet VW-0308 – DVD

• ROUGH TO READY - DVD

  $29.95 $17.97 0 review(s)

  
  

  Subtitle: “Bench-side instruction on preparing rough lumber with hand tools.“ In this video, Rob Cosman demonstrates how to prepare rough lumber with hand tools. He covers flattening, making the board square and true, and how to use a shooting board. Includes many useful tips on sharpening, planing, gauges, etc.

• ROUTER DOOR BASICS VW-0204 - DVD

  $24.95 $14.97 0 review(s)

  
  

  Learn in this video various methods of joinery such as haunched mortise and tenon, stub mortise and tenon, miter, and biscuit joint. Learn to add molding to enhance your cabinets. Cliffe covers two methods to make raised panels. One with a spiral bit and one with a raised panel bit. Using the special jigs and fences in this tape will improve your efficiency and the appearance of your cabinets.

• ROUTER DRAWER BASICS VW-0202 - DVD

  $24.95 $14.97 0 review(s)

  
  

  Learn in this video to make drawer side with a number of set ups using the portable router and the router table. Includes various joining techniques i.e. glue lock, rabbet, lock corner, dovetail, etc. Cliffe includes information on beading which helps the appearance of the fit of the drawer. Learn to set up the router table for accurate and efficient routing of all drawer parts.

• ROUTER MADE DOVETAILS VW-0203 - DVD

  $24.95 $14.97 0 review(s)

  
  

  If you have ever wondered if there is an easy way to learn how to make half-blind dovetails using one of the many dovetailing jigs on the market, this video is for you. Learn about various jigs available, types of bits and accessories. You will see many different jigs set up and used and you will see incorrectly cut dovetails and learn the techniques for correcting them. Dr.Cliffe gives you the rules and guidelines for successful routing of half-blind dovetails.

• RUSTIC FURNITURE BASICS - DVD

  $19.95 $11.97 0 review(s)

  
  

  As a companion to the book of the same name, this useful DVD shows you all the basic techniques you'll need to create distinctive rustic furniture. With clear, simple language and valuable close-up shots of each procedure, renowned woodworker Doug Stowe demonstrates how to master every facet of this ancient craft. From selecting branches and logs to finding recycled materials, you'll discover how rustic furniture making is the original "green" building practice. And you'll see precisely how to use basic hand tools and low-tech procedures to create attractive, functional pieces with a primitive, natural look.

• SANDING & STAINING THE CABINET VW-0308 - DVD

  $24.95 $14.97 0 review(s)

  
  

  This video helps you through surface preparation, sanding, and patching a surface before staining. Learn to remove mill marks, and sand moldings and raised panels. There is an excellent discussion on pigments and penetrating stains as well as the appropriate methods for applying them.

• SCRAPING WOOD - DVD

  $37.95 $22.77 0 review(s)

  
  

  Bench side instruction on tuning, sharpening and using scraping tools. This is perhaps one of the most anticipated DVDs Rob has made. Many people own scraping tools but don't know how to use them and the "how to" information is scarce. This DVD will teach you how to sharpen and use card scrapers, cabinet scrapers and scraper planes. In a step-by-step fashion Rob will carefully walk you through explaining and demonstrating along the way. With figured wood, scraping can be the most efficient way to process and prepare the surface. Without the cost, dust and noise of power sanding, removing a sub one thou shaving from figured wood can be as much fun as the finished product. Over 1 1/2 hours of personal instruction from the bench of one of today's leading hand tool coaches.

• SHARPENING PLANES AND CHISELS WITH IAN KIRBY - DVD

  $21.95 $13.17 0 review(s)

  
  

  Subtitle: "A Sharp Edge in 60 Seconds". Mastercraftsman Ian Kirby covers types of planes, approach angle, reflective backs, new blades, grinding a bevel, sharpening a bevel, types of grinding equipment, how to grind, waterstones and how to use them, and back sharpening.

• SKETCH UP FOR WOODWORKERS PART 2: ADVANCED TECHNIQUES

  $29.95 $17.97 0 review(s)

  
  

  In this nearly two-hour long video, I show you techniques for adding details to your models. Want to include raised panel doors with cope-and-stick joints to your project? It's easier than you think. How about dovetailed drawers? You'll learn the secrets of making the first part of the joint quickly, then copying those dovetails everywhere you need them. The class also covers things like turned parts and cabriole legs. Unlike other videos for learning SketchUp, these videos are presented by a woodworker, and concentrate on making woodworking projects. Click below to see a preview of this session.

• SKETCH UP FOR WOODWORKERS, PART 1: GETTING STARTED

  $29.95 $17.97 0 review(s)

  
  

  This ShopClass is comprised of our series of 12 lessons in the basics of using SketchUp (a free 3D-modeling program from Google). These video lessons take you step by step from setting up the software to gathering information from your finished model. So you'll head to the shop with all the information you need to build any project with confidence. You'll know the exact sizes of every part, and how the parts go together – before you ever cut any wood! • 2 Hours of Expert 3D Computer Modeling Instruction • Learn at Your Own Pace • Build on Screen Before You Head to the Shop • Learn the Basics of Google SketchUp • Master the Skills You Need • Techniques for Quick Designs • Set Up SketchUp for Efficiency & Accuracy About the Presenter: Robert W. Lang is the executive editor of Popular Woodworking Magazine, and the author of several books on furniture styles and design. With more than 30 years experience designing and building furniture and in CAD and computer illustration, Bob brings a practical style to teaching 3D modeling with Google SketchUp.

• SMALL SHOP PROJECTS - DVD#

  $19.95 $11.97 0 review(s)

  
  

  Become a wizard at creating beautiful keepsakes from all that saved scrap with Small Shop Projects. In this one-of-a-kind DVD, woodworker Jim Cummins shows you how to transform small scrap you can't bear to throw away into a valued treasure. You'll learn several variations on making intriguing boxes ... and discover a level of precision and technical wizardry that enhances all of your work. You'll also learn how to: Match grain in hexagonal boxes Set up a saw for multi-sided boxes Create a sliding fulcrum lid Build a puzzle box Make splined mitered doors The next best thing to a private lesson. Small Shop Projects takes you right into expert woodworker Jim Cummins' shop for an unforgettable 60-minute lesson. You'll see firsthand exactly how to do the work -- the tools, the techniques, and the subtle rhythms of each process. Impossible to miss a single step! Go directly to the chapter you want to watch and replay it as often as you want. Master it before you move on! Meet your teacher -- woodworking expert Jim Cummins. Jim was an editor of Fine Woodworking magazine for seven years, and then ran a framing business in Woodstock, New York.

• SMALL SHOP TIPS & TECHNIQUES - DVD#

  $19.95 $11.97 0 review(s)

  
  

  Make the most of your small shop with Small Shop Tips & Techniques. In this one-of-a-kind DVD, woodworker Jim Cummins shows you how to expand your shop's capabilities just by improving your woodworking techniques. You'll discover new approaches and methods of bandsawing a box, making a marking gauge from scrap, and cutting precise angled joints. You'll also learn how to: Get a bandsaw to work properly Expand the role of your drill press Tune up a chisel Sharpen twist drill bits Make machines and hand tools work together The next best thing to a private lesson. Small Shop Tips & Techniques takes you right into expert woodworker Jim Cummins' shop for an unforgettable 60-minute lesson. You'll see firsthand exactly how to do the work -- the tools, the techniques, and the subtle rhythms of each process. Impossible to miss a single step! Go directly to the chapter you want to watch and replay it as often as you want. Master it before you move on! Meet your teacher -- woodworking expert Jim Cummins. Jim was an editor of Fine Woodworking magazine for seven years, and then ran a framing business in Woodstock, New York.

• SPECIAL PLANES - DVD

  $19.95 $11.97 0 review(s)

  
  

  Because the hand plane is an essential part of the woodworker's toolbox that can add style and elegance to any project, this instructional dvd explains in detail how to successfully set up and use grooving, molding, shoulder, and miter planes, as well as fillisters and spokeshaves, among others. Instructions are provided for making a special plane, as are tips on what to avoid and what to look for when buying a used plane. The friendly and simple style of instruction will teach every woodworker how to both save time and increase productivity. Region 1 compatible.

• THE ART OF MARQUETRY - DVD

  $24.95 $14.97 0 review(s)

  
  

  This 50 minute DVD covers many aspects of marquetry: how to choose veneer; creating patterns; how to transfer patterns to the veneer; cutting technique; how to adhere the veneer to a piece of wood and some information on applying a finish to the piece.

• THE NEW TURNING WOOD WITH RICHARD RAFFAN - DVD *REORDER*

  $24.95 $14.97 0 review(s)

  
  

  In this updated version of the world's most popular turning video, you'll discover new insights, tips, and advice from Richard Raffan, the acknowledged master of this subtle art. In your one-to-one seminar with this woodturning guru, you'll learn all the moves that are so important to skillful woodturning. Raffan leads you through a range of useful projects from his companion book, Turning Wood with Richard Raffan. You'll see for yourself how to master the essential techniques. * Sharpening * Stance and movement * Gouge exercises * Skew exercises * Centerwork techniques * Facework techniques

• The Scrollsaw: A Beginner's Guide - DVD

  $19.95 $11.97 0 review(s)

  
  

  The Scroll Saw: A Beginner's Guide takes viewers step-by-step from beginning to end of several projects that illustrate the scroll saw's versatility - from shaping wood to creating personalized greeting cards.

• The Workbench: How to Design or Modify a Bench for Efficient Use - DVD

  $25.00 $15.00 0 review(s)

  
  

  When building furniture, you need your workbench to be able to hold your boards to accurately work the faces, edges and ends. Chris Schwarz has built and used ten different types of workbenches and has experimented with many work holding challenges and solutions. In this DVD he demonstrates various strategies for holding the workpiece for these essential tasks, by designing or modifying a workbench for efficient use.

• TURNING BETWEEN CENTERS: THE BASICS - DVD

  $19.95 $11.97 0 review(s)

  
  

  Starting with safety measure, and tool use, professional turner Dennis White presents advice on posture and turning the perfect cylinder.

• USING A HAND PLANE WITH IAN KIRBY - DVD^

  $21.95 $13.17 0 review(s)

  
  

  Subtitle: "Tuning, Setting the Blade, and Planing Techniques." Introduction to planing, parts of the plane and tuning the parts, setting the plane, using the plane, planing in the vise and on the bench, preparation of stock, making a kitchen cutting board.

• WOODCARVING #1: SHARPENING TECHNIQUES - DVD

  $32.50 $19.50 0 review(s)

  
  

  Bench side instruction on how to make a gouge do more than you may have thought possible. Chris starts with a new tool and thoughtfully walks you through all the steps of preparation to finally achieve that desired cutting edge. You are guided through the maze of available chisels, Chris answers the how's and whys and suggests where to start when it comes to acquiring tools. Included in this dvd are a few of the practises Chris was taught during his apprenticeship that are not widely known yet I consider revolutionary as per sharpening a gouge.

• WOODCARVING #2: LETTER CARVING - DVD

  $32.50 $19.50 0 review(s)

  
  

  This dvd is 1 1/2 hours long and teaches the fundamentals of incising letters. Chris taught me to do this and it was easier than I thought. Logically broken down to manageable steps Chris takes the viewer to success. Intended to teach the furniture maker how to carve it will also help the seasoned carver to learn some of Chris's techniques.

• My Cart
• Login
• Register

• Site Map
• About Us
• Terms and Conditions
• Contact Us
• Newsletter Signup

Call us: 800-345-4447